ccs7.4怎么打开工程

打开Code Composer Studio 7.4的工程非常简单，只需要几步 *** 作就可以完成。

1. 从菜单栏肢腊中选择“文件”，然后选择“打开”。

2. 在d出的对话框中，选择要打开的工程文件夹。

3. 点击“打开”按钮，这时就可以看到工程中包含的文件了。

4. 通过在左侧资源浏览器中选择不同文件历液滑来浏览具体内容或者修改文件源代码。

5. 最后，在菜单栏上选择相应的功能来生成、下载和运行代码到目标板上即可实现你想要的埋空功能。

你是想问ccs3.3如何读取芯片程序吗？腔扮坦ccs3.3读取芯片程缺告序步骤：

1、伍桐首先打开ccs3.3软件。

2、给主控机箱上电,主控插件指示灯亮起。

3、按下“ALT+C”按键,建立ccs3.3软件和芯片间的联系，然后即可读取。

1、要在Memory Section Manager属性中为“Segment For DSP/BIOS Objects” 和 “Segment For malloc()/free()”逗笑分配Dynamic Memory Heaps，必须首先在要分配的段（比如，IRAM）中勾选“create a heap in this memory“，并给出heaps size。

2、要把*.tcf文件生成的*.cmd文件手动加入工程中，否则编译报错如下：

------------------------------ test.pjt - Debug ------------------------------

Warning: The project has no cmd file while the Text Linker is selected

[Linking...] "D:\雹指迹源并CCStudio_v3.3\C6000\cgtools\bin\cl6x" -@"Debug.lkf"

<Linking>

>>warning: creating output section .gblinit without SECTIONS specification

>>warning: creating output section .mem without SECTIONS specification

>>warning: creating output section .rtdx_data without SECTIONS specification

>>warning: creating output section .sys without SECTIONS specification

>>warning: creating output section .clk without SECTIONS specification

>>warning: creating output section .hst1 without SECTIONS specification

>>warning: creating output section .hst without SECTIONS specification

>>warning: creating output section .pip without SECTIONS specification

>>warning: creating output section .hst0 without SECTIONS specification

>>warning: creating output section .hwi_vec without SECTIONS specification

>>warning: creating output section .swi without SECTIONS specification

>>warning: creating output section .printf without SECTIONS specification

>>warning: creating output section .sts without SECTIONS specification

>>warning: creating output section .tsk without SECTIONS specification

>>warning: creating output section .TSK_idle$stk without SECTIONS specification

>>warning: creating output section .idlcal without SECTIONS specification

>>warning: creating output section .idl without SECTIONS specification

>>warning: creating output section .LOG_system$buf without SECTIONS

specification

>>warning: creating output section .log without SECTIONS specification

>>warning: creating output section .sysinit without SECTIONS specification

>>warning: creating output section .vers without SECTIONS specification

>>warning: entry point symbol _c_int00 undefined

undefinedfirst referenced

symbol in file

-------------------------

SWI_D_rdytab d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IRAM$B d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_EXC_initd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_GBL_procId d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

__HOOK_knlId d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_KNL_exitd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IRAM$L d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TSK_VCREATEFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_UTL_doError d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

PIP_F_start d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

GBL_boot d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TSK_VDELETEFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

KNL_glue d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_UTL_doAbort d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IDL_F_loop d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_DFLTMICROSECS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_GBL_cacheInit64Pd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_EXC_dispatchd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_htimePerLtime d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

GBL_stackbeg d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_D_tddr d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_UTL_doPutc d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_MEM d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

PRD_F_tick d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

__HOOK_NUMHOOKS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_D_microseconds d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

RTA_F_or d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TRC_R_mask d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

GBL_stackend d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_c_int00 d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_config d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_OBJ_table d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

HWI_A_VECS d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_FXN_F_nop d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_enableTimer d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_D_prd d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IDL_D_calibrate d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_KNL_run d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

LNK_dspFrameRequestMask d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

CLK_F_isrd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

PIP_D_tabbeg d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TRC_cinitd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_UTL_haltd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_MEM_initd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

RTA_F_dispatch d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_startup d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_setup d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_KNL_queues d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

CLK_A_TABBEG d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

LNK_F_dataPump d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

TSK_VEXITFXN d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

HWI_F_dispatch d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_RTDX_Poll d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_initd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IDL_D_busyObjd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_TSK_exitd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

SWI_F_enable d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

FXN_F_rund:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_GBL_getVersion d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_CLK_inputClock d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

GBL_initdone d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

_HWI_dispatchTab d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

LNK_dspFrameReadyMaskd:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

IDL_F_busy d:\\CCStudio_v3.3\\myprojects\\test\\Debug\\testcfg.obj

>> error: symbol referencing errors - './Debug/test.out' not built

>>Compilation failure

Build Complete,

2 Errors, 23 Warnings, 0 Remarks.

3、

[main.c] "D:\CCStudio_v3.3\C6000\cgtools\bin\cl6x" -g -pdsw225 -fr"D:/CCStudio_v3.3/MyProjects/test/Debug" -d"_DEBUG" -me -mv6400+ -@"Debug.lkf" "main.c"

"main.c", line 20: warning: function declared implicitly

[Linking...] "D:\CCStudio_v3.3\C6000\cgtools\bin\cl6x" -@"Debug.lkf"

<Linking>

Build Complete,

0 Errors, 1 Warnings, 0 Remarks.

warning 的原因是对应行的元素没有声明。

解决办法就是加入声明。

举例如下：

#include <std.h>

#include <string.h>

//#include <stdio.h> //打开该句就可以了

void main(void)

{

unsigned int i

unsigned int sum=0

for(i = 0i<=100i++ )

{

sum += i

}

printf("the sum = %d .\n",sum)

printf("the program run over!\n")

printf("the program run over!\n")

---