wsd打印设备没有驱动程序

wsd打印设备没有驱动程序的解决措施如下：

1、在桌面上点击“计算机”右键，选择“设备管理器”；

2、在设备管理器中找到“其他设备”选择所下载的驱动程序，点击右键选择“更新驱动程序”；

3、进入更新驱动程序向导，点击“浏览计算机以查找驱动程序软件”；

4、选择设备的驱动程序所在的位置，点击“下一步”；

5、安装驱动完成即可。

ADuC内部的FLASH/EE具有三种安全模式：LOCK MODE, SECURE MODE, SERIAL SAFE MODE。这三种模式的具体区别请参看数据手册。您可以根据需要选择模式。这些安全模式可以通过串行通讯协议使能。

Flash/EE Program Memory Security

The ADuC841/ADuC842/ADuC843 facilitate three modes of Flash/EE program memorysecurity. These modes can be independently activated, restricting access to the internal code

space. These security modes can be enabled as part of serial download protocol as described in Application Note uC004 or via parallel programming. The security modes available on the

parts are as follows:

Lock Mode

This mode locks the code memory, disabling parallel programming of the program memory. However, reading the memory in parallel mode and reading the memory via a MOVC command from external memory is still allowed. This mode is deactivated by initiating a code-erase command in serial download or parallel programming modes.

Secure Mode

This mode locks code in memory, disabling parallel programming (program and verify/read commands) as well as disabling the execution of a MOVC instruction from external memory,which is attempting to read the op codes from internal memory. Read/write of internal data Flash/EE from external memory is also disabled. This mode is deactivated by initiating a code-erase command in serial download or parallel programming modes.

Serial Safe Mode

This mode disables serial download capability on the device. If serial safe mode is activated and an attempt is made to reset the part into serial download mode, i.e., RESET asserted and deasserted with PSEN low, the part interprets the serial download reset as a normal reset only. It therefore cannot enter serial download mode but can only execute as a normal reset sequence. Serial safe mode can be disabled only by initiating a code-erase command in parallel programming mode.

WSD_SOCK32 - WSD_SOCK32.dll - 进程信息

进程文件： WSD_SOCK32 或 WSD_SOCK32.dll

进程位置： 系统目录

程序名称： Troj_adware. IE Kidnap

程序用途： 广告间谍木马病毒，浏览器劫持。

程序作者：

系统进程： 否

后台程序： 是

使用网络： 是

硬件相关： 否

安全等级： 低

进程分析： 该病毒修改Winsock LSP，劫持浏览器。删除后应进行修复。indows XP Service Pack 2 可以直接用“netsh winsock reset”命令修复。其他 *** 作系统可以用Winsockfix或Winsockxpfix软件修复。此类病毒模块包括：quartz32.dll，WSD_SOCK32.dll，msplus.dll等等

---