suse linux enterprise 11 x64怎么加载raid驱动

一般情况想常用的服务器，ibm hp dell等，linux系统都会内置raid卡允动的，不需要自己安装驱动，至少我是很少碰见要装驱动的情况。如果发现安装时认不到硬盘。可以按照以下官方说明来安装驱动。有问题可以在上班时间HI我。都在线。

RHEL5, unlike previous RHEL version, requires additional steps for installing the OS onto an Intel(R) Embedded Server RAID Technology volume.

1) Create a RAID array using the Intel Embedded Server RAID Technology II RAID BIOS Configuration Utility.

2) Boot your system using RHEL disc one.

3) At boot prompt type “linux nostorage”

4) Proceed with the installation and you will see a screen which provides you with ?Add device? button.

5) Click “Add Device”, a list of all drivers will appear

6) Press F2 to select driver from floppy

7) Insert the floppy with the Installer DUD image

8 ) Select device that corresponds to the floppy drive (sda in case of USB floppy)

9) After the driver is loaded the list of all drivers will appear again

10) Scroll down the driver list and select. Update megaide driver? in the list

11) Click OK

12) The driver will be loaded and the list of detected devices will appear

13) Click Done

14) Complete installation with RHEL CD

望采纳

首先，你需要有连接你的磁盘阵列的HBA卡的驱动其次，如果你的磁盘阵列很高级，需要明确指定OS是啥，否则OS是识别不到的话，那么就需要对磁盘阵列做真确的配置；其三，如果做了LUN

MASKING，请配置正确其四，网络层有zone划分等等，请确保划分正确其五，OS的 *** 作都是通用的fdisk

－l命令。和其它linux没啥区别

1，关机

2，加卡

3，开机

4，如果不能识别，装驱动

参考的命令，目录等：

lspci

/sys/class/fc_host

---